双行星搅拌机
Your current location : Home > 2000LVacuum Kneading machine

Contact us

FOSHAN HENGYUANLI CHEMICAL EQUIPMENT CO.,LTD

Tel:Nanhai District Guangdong city Foshan Province Xia Dong Shi losha Industrial Zone No. 5

TEL:0757-81287895

FAX:0757-81287896

E-mali:hyljx1688@163.com

URL:www.fshyl.cn



Contacts:Xiangjinqi

Mobile phone:186-8927-0307    TEL:0757-81287895 


Contacts:Xiangjinhong

Mobile phone:188-2349-7401    TEL:0757-81287895 





2000LVacuum Kneading machine

  • Product overview
  • Performance characteristics
  • Technical parameter

Vacuum Kneading machine is widely used in high viscosity,high elastic plastic materials mixing,kneading,crushing,mixing,repolymerization etc..Kneading machine has uniform mixing,no dead angle,the kneading efficiency etc..Applications:sealant,silicone rubber,silicone rubber,glass,silicone,gasket gum,modified starch,chewing gum,bubble gum,pulp,cellulose,battery,ink,pigment,dye,medicine,resin,plastics,rubber,cosmetics,CMC,adhesives and other industries. Our company process requirements,can be made of vacuum,pressure and pressure three types,the heating is a jacket,steam and electric heating method.Discharging a hydraulic double cylinder,valve and screw etc..

Main Application:
1.Kneading Mixer can be widly used in Chemical,Plastic,Rubber,Printing-ink,Carbon,Medicine,Food Industry.

2.The part which contact material is made by Stainless Steel or Cast Steel,can insure the Purity and Quality of the product.It takes “Z” shapes double blades,can insure the material rapidly react,evenly mix.

3.Kneading Mixer mainly including Three Kind:Ordinary Type,Pressure Type,Vacuum Type.

4.Heating eay is generally Electric Heating and Steam Heating.

5.Discharing ways is :Hydraulic dumping up cylinder Type;Ball valve Discharge Type;Screw extrusion Type.

Structure Feature and Working Principle:
Start the motor,add the material,after adding material,clean the foreign matter on the cylinder port.It takes Hydraulic Dumping up cylinder Discharge the material,it is rapid and clean to discharge.

D:Lubricition System:
1:Gear Reducer:According to the lubricating oil according to practical application.
2:Like Bearing,Overturn turbin box,operate about 500 hours add lubricating oil.
3:Other parts according to practical situation.

Test run and Preparation of before operation:

1:After the Installation,firstly proceed Cleaning, Decontaminate and add antirust grease.Check every lubricating part then add lubricating oil.
2:Before operating,check the Up-tight Degree of triangle belt.
3:Check the fastening piece if loose’Circuit and electrical equipment if safe.

4:Before test run should insure the Kneading room is clean.Keep machine Idling about 10-15 minutes.After insuring machine is in normal operation then put the material into production.

暂无内容
暂无内容
a2.pngmobile phone:

18823497401  / 18689270307

a3.png

mailbox:

hyljx1688@163.com

a4.png

Telephone:

0757-81287895

a5.png

address:

Nanhai District Guangdong city Foshan Province Xia Dong Shi losha Industrial Zone No. 5

真空行星搅拌机

Copyright © Foshan Hengyuanli mechanical equipment Co., Ltd All rights reserved
备案号:粤ICP备19099505号